Spit Pan Tapcon
Drill, Drive, Done
Removable, high speed, masonry fastening system that cuts its own thread into brick and concrete
Applications
|
Channel, E Clips, Cable bow, Prysmian FireFix, Threaded Rod Hangers, dado trunking, plastic back boxes
|
|
push / pull bars, formwork, shuttering, site barriers, temporary safety rails ,security fencing
|
Product Features
| T25 / T30 Drive recess for fast installation |
| Patented Shark Tooth thread - high thread with low profile for a firmer fix |
| Chamfered tip for easy hole access |
| Round head profile ensures cables are not damaged |
| Washered Pan Tapcon is a one part fixing, eliminating the need for washers |
Specification
| Diameter | 5.5-6.5mm |
| Thread form | Shark Tooth |
| Point type | Chamfered Tip |
Installation
| Drill pilot hole 4mm diameter, 10mm deeper than recommended anchor embedment (5.5mm Tapcon) |
| Drill pilot hole 5mm diameter, 10mm deeper than recommended anchor embedment (6.5mm Tapcon) |
| Clean out debris from the hole. Drilling the extra depth will allow for the mechanics of the anchor, therefore hole cleaning is not as important, but is advised |
| Insert Pan Head Tapcon in to T20 Drive Socket (5.5mm Tapcon) |
| Insert Pan Head Tapcon in to T30 Drive Socket (6.5mm Tapcon) |
| Seat point of anchor into pre-drilled hole and tighten until anchor is fully seated |
| Ensure that the drilling tool is not set to hammer action during installation |
Substrates
| Concrete, masonry, pre-cast hollow concrete beams, wood |
Product Range
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 603899 | 5.5mm | 4mm | 5mm | 30mm | 250 |
| 603900 | 5.5mm | 4mm | 15mm | 40mm | 250 |
| 603901 | 6.5mm | 5mm | 5mm | 30mm | 250 |
| 603902 | 6.5mm | 5mm | 15mm | 40mm | 250 |
Washered Pan Tapcon
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 603903 | 6.5mm | 5mm | 5mm | 32mm | 250 |
Accessories
| Code | Description | Box Qty |
|---|
| 016656 | T25 Bit | 1 |
| 016658 | T30 Bit | 1 |
